Operation Instructions

Operation Instructions

NOTICE: DO NOT continue pressing the button when fully covered or fully uncovered, motor can burn out.

Switch

Remote Operation

To operate the remote, disable the safety lock out by pushing both buttons for 2 seconds.

NOTE: After 1 minute of not pushing a button on the remote the safety lock out is activated.

1)Push to cover unit and release when fully covered.

2)Push to uncover unit and release when fully uncovered.

The swing arms rotate during operation. DO NOT stand in the path of or on the arms and make sure that NO ONE is in the path of or on the arms.

Routinely inspect tarp and swing arms. DO NOT operate if parts are worn or damaged. Worn or damaged parts may come loose. Replace all worn or broken parts IMMEDIATELY.

Damaged arms could come loose unexpectedly and allow the arm to rotate with tremendous force. DO NOT operate when damaged. Secure any damaged parts until repairs can be made.

Tarp MUST be fully covered or fully uncovered before driving. Wind can lift tarp and may cause components to come loose.