Maintenance Modifications

Maintenance Modifications

Modifications to bulkhead may damage or weaken the bulkhead. A damaged or weakened bulkhead could result in death or serious injury. See manual for what modifications can be made to the bulkhead.

Contact Aero Industries if you have any questions about repairing a damaged bulkhead.

Modifications to Wraparound Bulkhead

1)Do NOT weld anything to the bulkhead.

2)Do NOT cut or remove any welds.

3)Drilled holes are NOT allowed in the following areas:
- The vertical face of the top rail
- The hatted or V’d portion of the panel

4)Drilled holes are allowed in the following areas:
- The flat portion of the panel between the hatted or V’d portion of the panel
- On side panels
- Holes for a bow are allowed on the horizontal face as long as they don’t interfere with welds or the panel

5)Items bolted to the panel should be on the inside to avoid damaging the hatted or V’d portion of the panel