AeroForce F2B

Important Safety Information

Safety Messages

Read entire sheet and all instructions before operation. Refer to the website for an explanation of safety labels and symbols.

The AeroForce F2B arms move with the help of springs which must be properly released before any repairs. All spring tension must be properly released before any repairs. See “Properly Releasing Spring Tension” instruction before any repairs.

Routinely inspect tarp and arms for wear and/or damage. Replace all worn or broken parts immediately.

Be sure that your working platform is secure. Use OSHA-approved ladders or scaffolding to work above ground level.

Always wear safety glasses.

DO NOT operate when damaged. If the arms are damaged or fail to rotate freely under normal operation for any reason, discontinue use until repairs can be made.
Check for overhead power lines.

Always check for overhead obstructions before covering and uncovering.

DO NOT operate under low hung power lines.

Keep all clothing clear of moving parts.

Tarp MUST be fully covered or uncovered before traveling. If not properly positioned (covered or uncovered) damage could occur from overhead obstructions.
DO NOT stand in the path of or on the arms, or injury could occur.

Explanation of Signal Words


Indicates a hazardous situation which, if not avoided, could result in death or serious injury.


Indicates a hazardous situation which, if not avoided could result in minor or moderate injury.


Used to address practices not related to physical injury.